You are here: Products > Service > Catalog
 
Service
Tools and accessories >> Tools and accessories >> Measuring equipment
 Caliper (1)
  • Pocket Caliper with depth gauge and instantaneous adjustment
  • Accuracy according to DIN 862
  • Stainless steel
  • Main graduation and vernier chrome finish
  • For 4-fold measurements (inside, outside, depth and step measurements)
  • Backside with screw table
  • Delivered: in leatherette case
  • Measuring range: 150 mm
  • Jaw length: 40 mm
  • Vernier below: 1/20 (0.05) mm
  • Vernier above: 1/128 inch
 Laser range finder GLM 30 (1)
  • Laser measure functions include area, distance, length, volume, continuous measurement, addition and subtraction
  • Measurement automatically adjusts closer to or farther from target with ± 1/16 In. accuracy
  • Backlight for increased visibility in low-light conditions
  • Pocket size for easy access anywhere
  • Laser diode / Laser class: 635 nm <1 mW/2
  • Scale: 0.15 - 30 m
  • Precision: ± 2 mm
  • Protection class: IP 54
  • Rated power: 2 x 1,5 V (AAA)
  • Maximum operating time: 5 000 measurements
  • Weight: 0.1 kg
 Steel tape measure (1)
 Roll tape measure (2)
 Folding rule (1)

Polyamide with stamped measuring scale, detail level III, 10 elements.

 Metal square (1)
 Ruler (1)
 Thickness gauge (1)

Measurement range 0 - 30 mm.

 Wet-film thickness gauge (1)
The various measuring teeth are ideal for measuring wet film thicknesses quickly and easily.
 Microtester (2)
The handy Microtester makes it easy to measure the thickness of rubber linings in all positions. This automatic measuring device accurately indicates the thickness of the lining through trailing pointers. Thus, measuring errors are avoided. This device is optimally suited to metallic surfaces, due to its magnetic working process.
 Shore meters (2)
 Hygrometer (1)
Measures relative air humidity.
 Hydromette UNI 1 (1)
To determine ambient temperature, surface temperature and air humidity. These values are necessary to determine the dew point.
 Electrical insulation tester (4)
Electrical device for detection of perforations in corrosion-protection linings made of special rubber.
 Surface Comparator (1)

For testing surface structure following grit- or sand-blasting (4 roughness grades).

 Tread depth gauge (2)
 Measuring cup (1)
For dosing adhesives, heating solutions, hardeners, etc.
 Thermometer (1)
  • For measuring operating and process temperatures on objects such as steam lines, heating equipment, vulcanizing machines, motors, etc.
  • The temperatures on or in the material to be vulcanized can be measured with the appropriate measuring equipment and sensors
  • Regularly monitoring temperatures can help to avoid malfunctions or costs arising from the ensuing damage
 Spirit level (1)
  • With angle-measuring device and strong adhesive magnets
  • Hollow profile in silver aluminum, with impact-resistant plastic caps
  • Two spirit level for normal measurements, a rotating level for an angle measuring device
  • Angle scale: 90° - 0° - 90° and tilt 0 - 50 %
  • Tolerance of angle-measuring device ± 3 %