Universal usage. Excellent buffing texture. Significantly longer service life (5-6 times) than standard wire brushes. Improved operational safety. Bore Ø 14 mm, outer Ø 76 mm. For mounting with shaft for drill chuck (595 4261), shaft for quick coupling (519 6665), arbor MK I for flexible shaft (595 4286).

Wire brush (5)

For buffing, cleaning and derusting. Corrugated special wire (0.3 mm thick).
Rigid shaft Ø 6 mm for mounting with quick coupling (519 6672), arbor MK I for flexible shaft (595 0519).

Steel wire brushes, tress-shaped wire brush (3)

For buffing rubber-coated steel cables when splicing steel cord conveyor belts. Borehole Ø 16 mm to mount with arbor MK I.

Wire brushes embedded in PVC (3)

Grooved wire brush (2)

For buffing rubber-coated steel cables during preparation of belt splices. For use with arbor MK I for flexible shaft (595 0502).

Hard metal buffing wheel, copper-carbide (1)

Especially for buffing soft rubber at high speeds (3 800 - 4 500 rpm). Ensures rough surfaces at low speeds and little heating of surfaces.
Mounting with arbor for flexible shaft (595 4285).

Hard metal buffing disc, copper-carbide (4)

For use in angle grinder L 1202 (594 0620). Risk of damage to bearing when used with less powerful angle grinders.

Shell stones (3)

Ensure extremely uniform buffing results, such as for finishing of repaired areas.

Buffing pin (2)

Tungsten carbide buffing wheel (1)

Longer service life compared with copper-carbide hard metal buffing wheels.

Tungsten carbide buffing disc (1)

Longer service life and faster buffing compared with copper-carbide discs. Recommended for angle grinder L 1202 (594 0620). Risk of damage to bearing when used with less powerful angle grinders.

Hard metal contour wheels, copper-carbide (3)

For grinding curves and uneven surfaces as well as hard-to-access areas. Little heating of surfaces.

Grinding disc (2)

For working steel, steel casting, steel alloys and welding seams.

Cutting disc (2)

Vulkan fibre disc VSM (8)

With cross slots for use in angle grinders with flexible face disc.

Circular cutters (7)

Grind circular cutters with Allen key adapter for mounting drill chuck. Recommended rpm: max. 1 500 rpm.

HDL and HDL-MP drill (1)

For additional boreholes in rubber such as REMASTEEL.

Arbors for drill chucks (5)

Arbors for quick coupling (6)

Mounting tools for MK I flexible shaft (6)

Flexible face disc (3)

Universal lubricant (3)

For optimum lubrication when working with circular cutters and HDL drill.